I am replacing all the teak on my boat with starboard and I want to know if anyone has any reminants of starboard.

I need either 4 strips 2" wide and 6' long or one 8.5" x 6' piece. I want the 1/4" stuff or thicker.

Let me know. I am willing to pay a fair price.

I just don't want to buy a whole fullsized sheet of starboard because of how long the pieces I need are. Thanks.


P.S. If any one wants the 4 teak strips I am replacing. They are probably thick enough to where they could be laminated together to make a gun stock. They do have small screw holes in them.

Dagodiver!

If you want to drive to St Pete, I have a 7ft long piece of white 1/4 that is left over from building my cleaning table. We can cut the strips you need

hey brutha
There are 2 places up here ( homosassa/crystal river area) that sell starboard pieces. Dont know about the length most of the stuff they have are parts from mfrs. Quality Marine 352-7678 Monroe sales 352-527-3555..Worth a call BTW BOTH are good sources for discounted marine parts...

Thanks everyone,
Homasassa is a little closer to me I am going to call them first. Will report back. Pig, I will let you know. It is kinda of a haul for me.

Let me know if I can help.
Sounds like Big Pig has the deal.!


Dago.

Hey Ken

I want some of that, let me get some dimensions to you. Wanna trade some 1/2" for 1/4"?

I called the store in homasassa and they said they have about 3000 scrap pieces of starboard. $2 a pound.

Hey Ken

I want some of that, let me get some dimensions to you. Wanna trade some 1/2" for 1/4"?


John

No desire to trade. The piece I have is about 20" wide and 7' long. Call me tomorrow