I recently bought 2 used sea hornet guns off eBay and when took them apart to clean them they were very corroded and most of the SS parts need replacing. Do any of you shop owners have them or do I need to contact Kevin (Spear One) to get these parts? Here's a picture of what I need. The trigger Mechs seem fine. They work and lock the shaft in good so I won't replace them just yet.

I do know the whole trigger/line release/safety piece is one part, and it is sold or can be ordered for not too much,at any dive shop that sells Spearfishing specialties. Then you have a new one, and keep the old one for parts.

I recently bought 2 used sea hornet guns off eBay and when took them apart to clean them they were very corroded and most of the SS parts need replacing. Do any of you shop owners have them or do I need to contact Kevin (Spear One) to get these parts? Here's a picture of what I need. The trigger Mechs seem fine. They work and lock the shaft in good so I won't replace them just yet.


I have the parts you need. You may also want to check the condition of the trigger,sear, & spring inside the trigger cartridge due to the poor condition of the guns. The gun may be unsafe to use if these components are badly damaged. Call me:727-548-7686

Thanks Kevin.